Installation steps of embedded bathtub

1. Preparation:

We should choose a suitable bathtub according to the specification and size of the bathroom in advance. Don't buy it just because it looks good. Secondly, we should pay attention to leaving other spare space in the bathroom to facilitate the placement of other furniture in the future. Finally, we are ready to install the necessary wrenches, wires, bricks and tiles for the embedded bathtub.

2. Method steps:

The installation of embedded bathtub shall take into account the factors such as load-bearing, waterproof, maintenance, beauty, service performance and so on. Dadu is installed at one end of the toilet. Specific steps:

(1) After the pipeline is completed, the slotted part shall be repaired for waterproof, and 24-hour water storage test shall be conducted to ensure no leakage.

(2) First, we build an outline with brick and cement, paste the tiles we like on the periphery of the skirt, and build a platform with tiles inside the outline.

(3) use a foam brick to bake a bathtub. The height of the bathtub is generally within 600mm. Connect the water and keep it unobstructed. Then use foam brick to build walls and plastering. Pay attention to reserve manhole at the corresponding position of downcomer, about 250x300mm.

(4) Next, when the cement is dry and stable, we can connect the embedded bathtub sewer pipe and clip it into the pre built contour point-to-point.

(5) What materials are used on the table? You can use the same style of wall tiles, mosaics, artificial stones, marble, stainless steel, etc. it depends on your favorite style.

(6) Glass glue is applied on the wall where the embedded bathtub is installed, which can effectively prevent the bottom from being wet and effectively prolong the service life of the bathtub.